OREA V3

The evolution that will start a revolution.

Redesigned from the ground up to challenge the best of the best. A design that combines the advantages of flat bed brewers with the aspects people love in conical brewers. Experience bright brews with incredible clarity of flavour unlike any other brewer in the world.

Photographed by Jerney
Photographed by Jerney

There's a whole lot to love about V3

Fast flow rate

So what?

A faster flow rate gives us a wider range and more versatility. Go from just above espresso ground to coarse ground in one beautiful brewer. This allows you to explore a whole new set of brewing approaches and get more out of any coffee.

Consistency

How?

The Orea Brewer has a unique ring design and a totally flat bed, which reduces inconsistencies experienced with other flat bed brewers. Because there are less factors at play, you will inherently have more consistent brews. Due to the fact that you don't have a series of small holes that can easily clog, you will get less stalling. Finally, because the bed is totally flat, adding more coffee won't impact flow and consistency.

Superior thermal properties

Why is that?

The chosen material, TROGAMID®, has one of the lowest thermal conductivity rates. It acts as an insulator - which you will notice as you brew. It's so good at insulating (or so bad at heat transfer) that we don't need a handle or a sleeve, because it doesn't get too hot to the touch. This means that the heat and energy remains in the coffee bed while brewing, rather than escaping. This will increase extraction and we find that it brings more sweetness in the cup.

Lightweight & packable

Is it really?

This brewer is incredibly light, starting at 39g (Small brewer) or 53g with the base (Small brewer). It's also really small, taking a lot less volume in a bag than other brewers. It's hard to find anything to match it! If you opt for the Large size, you won't compromise too much on weight and packability, as both are fantastic for brews on the go.

Tough & durable 

That's what they all say, right?

There is a lot of clever marketing in the coffee brewer world - but you can rest assured that this is not an example of that. We chose this material because it's flexible, impact-resistant, and crack-resistant. You don't believe us? Here's a video where we smash it with a mallet.

Recycled materials

What kind of recycled materials?

The V3 Base is made 100% from post-consumer recycled Polypropylene plastic, right here in the UK. We collect waste before it's ever thrown in the bin, clean it, sanitise it, and shred it into new raw material. This is then re-injected into the beautiful V3 bases in an artisanal process. Your Orea V3 base will be made from rescued bottle caps, takeaway containers, and discarded tupperware. All of this, 100% local. A true waste to treasure journey, not a marketing stunt.

Unapologetic beauty


Photographed by Jerney
Photographed by Jerney

The patented ring design ensures faster flow & unrivalled consistency.

One brewer / Two sizes

Large (185)
Clear ◯ or Glossy Black ⚫️
1-2 Cup

What does this mean?

Both Orea Brewer V3 sizes (large and small) have the same geometry and drainage design. This means you can use the Large version to make small 1 cup brews like with the Small version. Go from 10g of coffee to 36g of coffee in one brewer - with great performance over different quantities. If you tend to brew just 1 cup (10g-18g) then the Small version will be more suitable.

52g / 1.83oz Brewer
+ 14g / 0.49oz Base
7.2cm (height) x 9.1cm (diameter)
x 10.4cm Base width
100% Trogamid®
Compatible with Kalita 185, Fellow Stagg X, & Saint Anthony Industries F70 Filters
Compatible with the V3 Base
Small (155)
Clear ◯ or Glossy Black ⚫️
1 Cup

What does this mean?

The Small Orea Brewer V3 is great for brewing 1 cup at a time, using 10g-18g of coffee. If you enjoy brewing in bigger portions, we would recommend the Large size.

39g / 1.38oz Brewer
+ 14g / 0.49oz Base
5.7cm (height) x 8.2cm (diameter)
x 10.4cm Base width
100% Trogamid®
Compatible with Kalita 155 and Ninety Plus
Kone 10.1 filters
Compatible with the V3 Base

One base / Many patterns

Pattern: Rainbow

Made from 100% post-consumer recycled plastic

Perfectly imperfect - made in the UK in an artisanal process from post-consumer plastic waste like bottle caps, tupperware, and takeout containers. This process results in each piece being slightly different as the plastic flows together uniquely each time. There are 7 patterns to choose from, but each base is one of a kind.

Learn more about this process

We've been supporters of an open-source project called Precious Plastic for years. It's a community that provides free designs and knowledge for machinery, tools and methodology to recycle post-consumer plastics.

We take plastic that would have been thrown into a bin and process it locally. It's collected in the community, sorted, cleaned, shredded and re-injected into these beautiful bases. Normally, only about 10% of plastic that is put in a recycling bin actually gets recycled. Most of it ends up in landfill - which is a problem.

We love this process because it keeps everything local and it avoids the traditional waste stream, creating more local circularity.

Besides being a great process, we also love the outcome. Unique results in each product, crafted locally.

Some of our releases go out of stock very quickly. The newsletter is the best place to get notified when new products launch or when products come back to stock. No spam, just product updates!

© 2023-2024

OREA 
86-90 Paul Street
London
EC2A 4NE